8 Use Elements Of Shelf Steel Platform

The use range of the steel structure platform will be larger than other types of shelves. It is precisely because of this that we must pay attention to safety during use. The eight elements of the use of the steel structure platform need to be followed by us:

1) Load limit plates should be set up during the use of steel structure platforms, especially for steel platform racks with hydraulic lifting platforms, which need to be marked with load limits at prominent positions;

2) The resting point and the upper tensioning point of the steel structure platform are located on the building, so they cannot be set on construction facilities such as scaffolding, and the support system must not be connected to the scaffolding;

3) The concrete beams and slabs of the steel resting point of the steel platform should be embedded and connected with the bolts of the platform;

4) The horizontal angle between the steel wire rope and the platform should be 45 degrees to 60 degrees;

5) The beams and columns of the tension nodes on the upper part of the steel structure platform should be checked for tensile strength, so as to ensure the safety of the building and the platform;

6) When installing the steel structure platform, the steel wire rope should be held firmly by special hooks. If other methods are adopted, the number of buckles should not be less than 3. Soft pads should be added to the wire rope around the acute angle of the building, and the outer opening of the steel platform should be slightly higher than the inside;

7) The steel structure platform should use a snap ring, and the hook should not be directly hooked to the platform ring;

8) Protective fences should be installed around the steel structure platform, and if necessary, fences should be installed to prevent people or goods from falling.