News

 Another Pallet Rack Project Finished Installation, GOOD JOB! The most professional installation teams from HEDA Shelves, your best racks supplier-HEDA Shelves!

What pallet Used In Shuttle Pallet Racking System: According to the material, The pallets are divided into steel pallets, wooden pallets, plastic pallets, etc. The steel pallet has strong structure, strong impact resistance and better load capacity than other pallets, but the steel pallet is expensive and easy to rust and corrode; the wooden pallet is cheap and easy to maintain, but the fire resistance is poor, it is not moisture-proof, and it is easy to mold after damp. It runs counter to the theme of promoting environmental protection in the country; plastic pallets have long service life and can be recycled and reused, but have low strength, poor impact resistance, and great limitations in structure and size, and are easily deformed after being stressed.According to the characteristics of the above three material trays, the structure requirements of the shuttle rack to the tray, the specific choice of which material tray, according to the user's own access to the weight of the goods and the warehouse environment, the suitable temperature environment for the plastic tray is -25 °C to 40 °C, the temperature is too low, it is easy to become brittle and hard, and when the temperature is too high, it will become soft. Wooden pallets are not suitable for humid environments, otherwise they are prone to moisture and rot, and wooden pallets are not suitable for storage for a long time, otherwise they are prone to insects and affect the quality of stored goods, so steel pallets are ideal for shuttle racks.Tray structure used in the shuttle racking system: The shuttle racking system is a product that has been upgraded through the shelf. The shuttle bus replaces the forklift truck and enters the interior of the rack for work, that is, the shuttle car carries and stores the pallet goods. Therefore, the shuttle car requirements for pallet specifications are particularly important. Generally speaking, as long as the tray size is suitable for the size of the shuttle, the shuttle can carry it. The bottom structure of the tray is usually a Sichuan word, a bottom word or a double-sided double disk, that is, the tray suitable for the through shelf is also suitable. Used on the shuttle shelf. 

We are currently one of the biggest manufacturers in China for Pallet Rack, Drive-in rack, Cantilever Rack, Radio Shuttle Rack, Mezzanine Floor and Medium Duty Shelving and etc. 1.We have a wide range of product category for you to choose,from related products to fashion design.2.We have bureau veritas certification and EC Declaration of conformity.3.We use thick steel and guarantee high coating quality.4.We provide installation drawings and video instruction for free.5.Annual production capacity:15000 sets of shelves6.Since 2001,Factory + trade,factory more than 13000m²;office area 500m² in pazhou,near guangzhou international convention center.7.We offer OEM/ODM service with our own strong innovation ability. 

Pallet rack, also known as beam rack, are usually named heavy-duty shelves, and are most common in various domestic storage racking systems. It is suitable for a variety of small batches of goods, but also for a small variety of large quantities of goods. Such shelves are most commonly used in high-bay warehouses and ultra-high warehousesAdvantages: high utilization, flexible access, is the most commonly used, economical and safe shelf, with a selectivity of up to 100%, suitable for all types of warehouses. It can also form a variety of storage methods, with high space utilization, strong carrying capacity and good stability. It can design a series of different specifications according to the actual use of users, and is the most commonly used shelf in various industries.Disadvantages: Low storage density requires more lanes. Usually 3-5 layers are used, and the shelf height is limited, generally below 10 meters.

    Quality inspection with clients in our factory yesterday. Full satisfaction and new order on next month! Welcome to visit us anytime!     Our products includes: Pallet rack (beam rack), Drive-in rack, Radio shuttle rack, Cantilever rack, Mezzanine, Steel platform, Multi rack, Carton flow rack, Medium duty shelving, Light duty shelving, Movable shelving, Supermarket shelf,Customized rack,etc.

Only applicable to long or long rolled goods.It is necessary to cooperate with the handling equipment with wide fork distance, such as the side forklift with large fork distance.The shelf height is limited, generally below 6m.Space utilization is low, about 35% -50%.Storage type: long strips and long rolls.

The warehouse storage rack and the Drive In Rack are all multi-door type, and the tray unitized goods are connected in the depth direction one after another in the form of a shelf structure stored on the cantilever beam. The structure of the mold frame can share the working channel of the forklift and the storage space of the goods, and greatly improve the space and space utilization of the warehouse. However, the goods in the same working channel cannot be first-in-first-out, and are suitable for large quantities and small varieties. Or the goods in the working channel flow to the same customer's goods storage, such as beverages, dairy products, tobacco, low-temperature frozen storage, standard-sized home appliances, chemicals, clothing and other industries. According to statistics, the entrance-type shelves can achieve the maximum storage density, the space effective utilization can be increased to up to 90%, and the site area utilization can reach more than 60%! The advantages of Drive In Rack are: The cargo storage channel is also a forklift storage and transportation channel, which is a form of shelf with high storage density. It is usually used for the storage of goods with a small variety but large batch size and low requirements for the selection of goods.With the lifting height of ordinary forklifts and the conventional scheme of three-storey cargo shelves, the effective storage capacity of the warehouse can be increased by more than 100%. In contrast, the investment cost is controlled and the benefits are significantly improved. From the global storage cost calculation, generally increasing the storage capacity benefit within three years can offset the investment cost.The goods follow the principle of advanced and backward output, and are suitable for most transportation machinery storage and transportation operations.        

From the point of view of use, wooden shelves, especially storage shelves, are bulky and cannot be adjusted. Steel shelves, due to the high load-bearing capacity of the steel itself, can also achieve high heavy-duty forces under lightweight materials, which is impossible for wooden shelves to hit. In terms of materials, the cost of a typical steel shelf is slightly higher than that of a wooden shelf. This is from the perspective of warehousing. If the same purpose is achieved, the wood is generally slightly cheaper than the steel in terms of the cost of raw materials processed. Special specifications may result in excessive waste of wood, except for this condition.From a processing point of view, the cost of steel shelves is much smaller than that of wooden shelves. Steel shelves are generally produced in batches, while the processing procedures for wooden shelves are more complicated. Each process is time consuming and the entire processing cycle is long. This is a shortcoming that wooden shelves cannot solve, which greatly increases the overall cost of wooden shelves.From the surface treatment, steel shelves are fast, high quality and low cost. Moreover, wooden shelves are often painted, which is slow and costly.In terms of longevity, wooden shelves are generally only five to six years, while steel shelves are used properly and can even be used for twenty years. Of course, if it is used for display, the ease of deformation for wooden shelves, it is possible to make a variety of shapes, which is not easily achieved by steel shelves.  From the perspective of handling, once the wooden shelves are formed, they cannot be disassembled under normal circumstances, which greatly increases the difficulty of handling the shelves, which leads to the direct cost of throwing away the secondary cost. The steel shelf can be easily disassembled and assembled without the cost of re-production of the shelf.

After the shelves are used constantly, they will age out. So, in the process of using the shelves, what should we pay attention to the life factors that affect the use of the shelves?First, the storage environment of the warehouse, such as the temperature, humidity, lighting, and ventilation conditions of the warehouse, if the humidity of the warehouse is too large, it will lead to rust on the shelves, reduce the load-bearing capacity of the storage shelves, and reduce the service life.Secondly, the transportation conditions avoid strong vibration and collision during the transportation of the shelves; advanced production methods can produce reliable shelves, high-quality warehouse shelves can extend the service life, and the packaging of the shelves is also exquisite. Good shelf life and better packaging can increase shelf life.When storing, the shelf should not be placed above the shelf load limit to avoid deformation of the shelf or accidents.

1. Although the supermarket shelves have been surface treated, they should also be protected from moisture during use. The shelves need to be wiped clean with a rag after damp, to avoid rusting the shelves. In particular, it is necessary to pay attention to the interface position of the shelves, which is more likely to rust. of.2. Supermarket shelves should not be overloaded during use. Each shelf has its maximum load. It has been destined in its design, so do not force the load during use to avoid potential safety hazards.3. Should pay attention to the size of the goods, not super high and wide, the size of the card and cargo should be less than the size of the supermarket shelf 100mm.4. the handling of goods should be handled gently, to avoid hitting supermarket shelves.5. To abide by the high-rise shelves in the supermarket shelves, the principle of heavy objects on the bottom.6. To choose the quality of the card board, do not need non-standard card board.7. When storing goods on the supermarket shelf, avoid people entering the bottom of the shelf and pay attention to safety.  

Mainly two reasonsOne is that the current construction height of warehouses is generally higher than three or four meters or even higher, unlike the previous construction of low warehouses due to financial and technical issues. After the warehouse is high, the standard storage capacity of 2 meters or 2.2 meters, 2.8 meters, etc. can not reflect higher utilization.Another is for the warehouse with more inventory varieties, the attic shelf can better use the space, better sorting goods. This advantage is not achieved by the very high storage shelves. Therefore, when we recommend the customer to choose which kind of shelf, we Heda shelf should be tailored to the customer according to the customer's goods and so on. That is to say, not all of the attic is used. If the goods are relatively small, the highly-high beam shelves or automated libraries are a better choice.

1. Attic shelves can increase the shelf height, make full use of the storage height, and make better use of storage space.2. The special floor slab is laid on the floor of the attic shelf. Compared with the pattern steel plate or the rigid grid. It has the characteristics of strong layer loading capacity, good integrity, uniform layer loading, smooth surface and easy locking.3. The Warehouse Mezzanine Rack fully considers humanized logistics, beautiful design and generous structure. Easy to install and disassemble, it can be flexibly designed according to the field.4. The Warehouse Mezzanine Racks shelves are suitable for storing a variety of types of items.